China 18 Years Factory Din 3352 Gate Valves - Pressure regulating valve – Jinbin Valve Manufacturer and Supplier

18 Years Factory Din 3352 Gate Valves - Pressure regulating valve – Jinbin Valve

Short Description:

Adjustable pressure reducing valve 200X pressure reducing valves automatically reduce and regulate a higher inlet pressure to a steady lower downstream pressure, regardless of chaning flow rate and varying inlet pressure. This valve is an accurate, pilot-operated regulator capable of holding down steam pressure to a re-determined limit. When downstream pressure exceeds the pressure setting of the control pilot, the main valve and pilot valve close drip-tight. Size: DN50 – DN600 Flange dril...

Send email to us Download as PDF

Product Detail

Product Tags

Feedback (2)

We normally think and practice corresponding on the change of circumstance, and grow up. We aim at the achievement of a richer mind and body and also the living for Controlling Machine Knife Gate Valves , Automatic Float Valve , Wcb Butterfly Valve , Our goal is "blazing new ground, Passing Value", in the potential, we sincerely invite you to mature up with us and create a vivid foreseeable future jointly!

18 Years Factory Din 3352 Gate Valves - Pressure regulating valve – Jinbin Valve Detail:

Adjustable pressure reducing valve

Pressure regulating valve

200X pressure reducing valves automatically Pressure regulating valve

reduce and regulate a higher inlet pressure to a steady lower downstream pressure, regardless of chaning flow rate and varying inlet pressure.

This valve is an accurate, pilot-operated regulator capable of holding down steam pressure to a re-determined limit. When downstream pressure exceeds the pressure setting of the control pilot, the main valve and pilot valve close drip-tight.

Size: DN50 – DN600

Flange drilling is suitable for BS EN1092-2 PN10/16.

Epoxy fusion coating.

Pressure regulating valve

Working Pressure	10 bar	16 bar
Testing Pressure	Shell: 15 bars; Seat: 11 bar.	Shell: 24bars; Seat: 17.6 bar.
Working Temperature	10°C to 120°C
Suitable Media	Water, oil & gas.

Shell and seal tests for each valve is done and recorded before package to make sure the product quality. The test media is water in room conditions.

Pressure regulating valve

No.	Part	Material
1	Body	Ductile iron/Carbon steel
2	Bonnet	Ductile iron/Carbon steel
3	Seat	Brass
4	Wedge coating	EPDM / NBR
5	Disc	Ductile iron+NBR
6	Stem	(2 Cr13) /20 Cr13
7	Plug Nut	Brass
8	Pipe	Brass
9	Ball/Needle/Pilot	Brass

If need the drawing details, please feel free to contact.

Pressure regulating valve

1. Work stable and reliable and big flow pass.

2. Disc open quickly and close slowly without water hammer.

3. High precision reducing regulator with large range.

4. Sealing performance and long service life.

Installation Requirements:

1. Recommend to install exhuast valve in pipe system to make sure the steady working.

2. Pressure of inlet should not less than 0.2Mpa. If it does, the performance will be worse. (Pressure tolerance of outlet will increase.)

Product detail pictures:

Related Product Guide:
Glenmore Water Reservoir renovations on ballot | News | Grooved Butterfly Valve
The Global Market for Zirconium (2019-2024): Anticipating a CAGR of 6.25% | Slide Gate Valve

Our target should be to consolidate and enhance the top quality and service of current goods, in the meantime frequently create new products to satisfy diverse customers' calls for for 18 Years Factory Din 3352 Gate Valves - Pressure regulating valve – Jinbin Valve , The product will supply to all over the world, such as: Victoria, Barcelona, Uruguay, We can give our clients absolute advantages in product quality and cost control, and we have full range of molds from up to one hundred of factories. As product updating fast, we succeed in developing many high quality products for our clients and get high reputation.

Butterfly Valve China