China Factory For Relief Valve - Pneumatic Eccentric semi-ball valve – Jinbin Valve Manufacturer and Supplier

Factory For Relief Valve - Pneumatic Eccentric semi-ball valve – Jinbin Valve

Short Description:

Pneumatic actuated Eccentric half Ball Valve Size: DN50-DN2000 1. Design as GB/T12237. 2. Face-to-Face dimension conforms to ISO 5752. 3. Flange drilling is suitable for BS EN1092-2 PN10 / PN16/PN25. 4. Test as ISO5208. Nominal Presesure (MPA) Shell Test Water Seal Test Mpa Mpa 1.0 1.5 1.1 1.6 2.4 1.76 No. Part Material 1 Body/Wedge Carbon steel (WCB)/CF8/ CF8M 2 Stem SS416 (2Cr13) / F304/F316 3 Seat SS/Stellite 4 Ball Alloy stee...

Send email to us Email WhatsApp

Product Detail

Product Tags

Feedback (2)

With our superb management, potent technical capability and strict quality command procedure, we go on to provide our shoppers with trustworthy high-quality, reasonable costs and outstanding services. We goal at becoming considered one of your most trustworthy partners and earning your pleasure for Pneumatic Actuator Hygenic Stop Valve , Butterfly Valve Casting , Slurry Knife Gate Valvea , We sincerely welcome friends from all over the world to cooperate with us on the basis of long-term mutual benefits.

Factory For Relief Valve - Pneumatic Eccentric semi-ball valve – Jinbin Valve Detail:

Pneumatic actuated Eccentric half Ball Valve

Pneumatic Eccentric semi-ball valve

Size: DN50-DN2000

1. Design as GB/T12237.

2. Face-to-Face dimension conforms to ISO 5752.

3. Flange drilling is suitable for BS EN1092-2 PN10 / PN16/PN25.

4. Test as ISO5208.

Pneumatic Eccentric semi-ball valve

Nominal Presesure (MPA)	Shell Test	Water Seal Test
Nominal Presesure (MPA)	Mpa	Mpa
1.0	1.5	1.1
1.6	2.4	1.76

Pneumatic Eccentric semi-ball valve

No.	Part	Material
1	Body/Wedge	Carbon steel (WCB)/CF8/ CF8M
2	Stem	SS416 (2Cr13) / F304/F316
3	Seat	SS/Stellite
4	Ball	Alloy steel / SS
5	Packing	(2 Cr13) X20 Cr13

Pneumatic Eccentric semi-ball valve

The eccentric ball valve is the ideal equipment for spray pulverized coal, coke oven gas, dusty gas and granular fluid. It is widely used in metallurgy industries. There are following charcters.

1. Straight, single seal, eccentric structure is particularly used for two-phase flow of spray pulvereized coal injection medium. It will not be unobstructed flow and stuck phenomennon.

2. There is compensation dosage of seal to make sure the long time usage.

3. It is easy to change the seat to avoid the change of whole valve.

Pneumatic Eccentric semi-ball valve

Product detail pictures:

Related Product Guide:
Glenmore Water Reservoir renovations on ballot | News | Grooved Butterfly Valve
Glenmore Water Reservoir renovations on ballot | News | Slide Gate Valve

Persisting in "High top quality, Prompt Delivery, Aggressive Price", now we have established long-term cooperation with customers from the two overseas and domestically and get new and aged clients' large comments for Factory For Relief Valve - Pneumatic Eccentric semi-ball valve – Jinbin Valve , The product will supply to all over the world, such as: Nepal, Bangladesh, India, If any product meed your demand, please feel free to contact us. We're sure your any inquiry or requirement will get prompt attention, high-quality products, preferential prices and cheap freight. Sincerely welcome friends all over the world to call or come to visit, to discuss cooperation for a better future!

4 Inch Check Valve Price

Cast Steel Globe Valve

Check Valve Dn100

One Piece Ball Valve

Remote Control Butterfly Valve

Valve Handwheel

We have been appreciated the Chinese manufacturing, this time also did not let us disappoint,good job!

By Dinah from Poland - 2018.06.05 13:10

This company has a lot of ready-made options to choose and also could custom new program according to our demand, which is very nice to meet our needs.

By Andrew Forrest from Slovenia - 2017.07.28 15:46

Write your message here and send it to us