China Factory making Knife Edge Gate Valve - Heavy Hammer Plug-in Valve sluice damper – Jinbin Valve Manufacturer and Supplier

Factory making Knife Edge Gate Valve - Heavy Hammer Plug-in Valve sluice damper – Jinbin Valve

Short Description:

Heavy Hammer Plug-in Valve sluice damper Technical Description of Heavy Hammer Plug Valve 1. Valve control way: field control, remote control 2. Valves are cut off in emergency and automatically opened by heavy hammer (counterweight) 3. Valve control mode: Windlass 4. Working time: 10-20s 5. Valve seal form: gas seal, high pressure (0.1Mpa) gas is injected from the outer end to form an airtight passage between the valve plate and the door frame， and sealing is achieved. Fans are provided by...

Send email to us Email WhatsApp

Product Detail

Product Tags

Feedback (2)

Our pursuit and corporation aim should be to "Always satisfy our consumer requirements". We carry on to build and style and design remarkable quality items for both our outdated and new clients and reach a win-win prospect for our clients at the same time as us for Rubber Duckbill Check Valve , Type Y Strainer , High Pressure Relief Valves , Welcome to make contact with us if you're fascinated inside our product, we are going to provide you with a surprice for Qulity and Value.

Factory making Knife Edge Gate Valve - Heavy Hammer Plug-in Valve sluice damper – Jinbin Valve Detail:

Heavy Hammer Plug-in Valve sluice damper

Slide damper gate valve

Technical Description of Heavy Hammer Plug Valve

1. Valve control way: field control, remote control

2. Valves are cut off in emergency and automatically opened by heavy hammer (counterweight)

3. Valve control mode: Windlass

4. Working time: 10-20s

5. Valve seal form: gas seal, high pressure (0.1Mpa) gas is injected from the outer end to form an airtight passage between the valve plate and the door frame， and sealing is achieved. Fans are provided by the demander.Gas flow basis: the clearance between the valve plate and both sides of the valve body is 2 mm, and then multiplied by the length of the required seal, thus the air outlet area is calculated. Air outlet area: specification 2400*3300 (0.036), specification 3200*4260 (0.04688), specification2600*2840 (0.03312). Because we need to maintain the pressure of 0.1 MPa, we need fan parameters: flow 120-180 m/h. Pressure 0.11 MPa

6. Anti-corrosion measures: Our company uses high-temperature anti-corrosion paint for painting.

7. Drainage measures: Drainage from the original chimney drainage wells, no additional drainage devices

Slide damper gate valve

Norminal Pressure	0.05 Mpa	0.1 Mpa	0.05 Mpa	0.25 Mpa
Sealing Test Pressure	0.055 Mpa	0.11 Mpa	0.165 Mpa	0.275 Mpa
Shell Test Pressure	0.075 Mpa	0.15 Mpa	0.225 Mpa	0.375 Mpa
Oil Test	4-6 Mpa
Sealing Materials	NBR	Silicon Rubber	VITON	Metal seat
Suitable Temperature	-20 – 100°C	-20 – 200°C	-200 – 300°C	-20 – 450°C
Suitable Media	Air, coal gas, dusty gas etc.

Note: It can be desinged as customer’s requirment. Please contact for the specificed drawing and dimension.

Slide damper gate valve

Product detail pictures:

Related Product Guide:
Global Regulating Valve Market Analysis Report 2019-2024: Regulator, Adams Valve, HOKE, Casco, Jordan Valve, Red And White Valve, Eminem | Rising Stem Type Gate Valve
New U.S. Sales Manager for Lorenz : Plastics Technology | Flange Spring No Return Check Valve

Being supported by an advanced and specialist IT team, we could give technical support on pre-sales & after-sales services for Factory making Knife Edge Gate Valve - Heavy Hammer Plug-in Valve sluice damper – Jinbin Valve , The product will supply to all over the world, such as: Iran, Bangalore, Iceland, Our company will continue to adhere to the " superior quality, reputable, the user first " principle wholeheartedly. We warmly welcome friends from all walks of life to visit and give guidance, work together and create a brilliant future!

Ball Valve Dn40